Paul Boddie's Free Software-related blog
Paul's activities and perspectives around Free Software
Testing Newer Work on Older Boards
Since I’ve been doing some housekeeping in my low-level development efforts, I had to get the MIPS Creator CI20 out and make sure I hadn’t broken too much, also checking that the newer enhancements could be readily ported to the CI20’s pinout and peripherals. It turns out that the Pimoroni Pirate Audio speaker board works just fine on the primary expansion header, at least to use the screen, and doesn’t need the backlight pin connected, either.
The Pirate Audio speaker hat on the MIPS Creator CI20.
Of course, the CI20 was designed to be pinout-compatible with the original Raspberry Pi, which had a 26-pin expansion header. This was replaced by a 40-pin header in subsequent Raspberry Pi models, presumably wrongfooting various suppliers of accessories, but the real difficulties will have been experienced by those with these older boards, needing to worry about whether newer, 40-pin “hat” accessories could be adapted.
To access the Pirate Audio hat’s audio support, some additional wiring would, in principle, be necessary, but the CI20 doesn’t expose I2S functionality via its headers. (The CI20 has a more ambitious audio architecture involving a codec built into the JZ4780 SoC and a wireless chip capable of Bluetooth audio, not that I’ve ever exercised this even under Linux.) So, this demonstration is about as far as we can sensibly get with the CI20. I also tested the Waveshare panel and it seemed to work, too. More testing remains, of course!